Landing Loop Docking Pole + Accessories
"The Landing Loop™ will revolutionize your boat docking. Never Jump Off Your Boat Again While Docking. Just Reach for Your Landing Loop™
Benefits of using the Landing Loop™:
- Reduces the risk of injury or damage to the boat while docking
- Enhances boating safety while docking
- Use it whenever there is no one on the dock to assist you in docking
- If the Captain gets within 6-8 feet of the dock, he or she can easily tie up using the Landing Loop™
- Tie-up to a cleat, piling, barge, bollard, or another boat
- Note: You have to provide the docking line for the Landing Loop™
- Useful when:
- Single-handed docking
- Traveling the ICW
- Tying up at a Public Dock, Gas Dock, or Pump Out Dock
Click here to see detailed instructions on how to set up your docking line for use with your Landing Loop™
Check out the Pontoon Deck Boat (PDB) review of the Landing Loop Docking Pole.
LIMITS OF LIABILITY: Neither Seller nor any of its agents or employees shall be held liable for any improper or incorrect use of its product or product information and assumes no responsibility for anyone's improper use of the Landing Loop™. This disclaimer of liability applies to any damages or injury under any cause of action.
Any person associated with boating knows that docking a boat is one of the most challenging experiences. There are many articles written in the boating magazines about this very subject. Everyone has at least one very unpleasant story to tell about someone they know, jumping off a boat to tie up or getting hurt during a docking experience. We decided to make the docking experience less confusing.
- Specs of the NEW Landing Loop design:
- Collapsed length of pole ONLY = 39 1/2 inches - extends to approx. 10 feet
- Collapsed length of the pole and "Y" frame = 54 3/4 inches
- "Y" frame width = 20 inches (outside dimension), 18 1/2 inches (inside dimension)
- Lighter weight New: 1 lb. 13 oz., Original: 2 lb. 9 oz - 3/4 lb. lighter
- Has an aluminum “Y” frame (the previous "Y" frame was steel)
- Quickly disassemble the frame for easy, compact storage.
The Landing Loop™ is a product created by boaters for boaters. It was in development for over three years. Use it on large boats, smaller boats, motorboats, and sailboats. It is lightweight, safe, and easy to use. It has been all over the United States, including Florida, the Great Lakes, Lake Champlain, and the Illinois River. Use it to dock in calm weather as well as in 30 miles hour winds.
We have created an instructional video and have included it on our Web Site. We ask that you watch the video and practice using the Landing Loop before using it for docking. It will prepare you and your crew so everyone will be more familiar with their function during a docking situation.
IT IS THE RESPONSIBILITY OF THE BOAT’S CAPTAIN TO MAKE ALL CRITICAL DECISIONS DURING ALL DOCKING SITUATIONS.
Use the Landing Loop™ when there is no one on the dock to assist you in docking. Using the Landing Loop may prevent your mates from getting hurt and make every docking situation a safe and more enjoyable experience.
- Use the NEW Landing Loop™ on any size or type of boat
- The NEW Landing Loop™ will accommodate up to an 18" wide cleat
- The NEW Landing Loop™ is lightweight (1 lb. 13 ounces), simple to use and has no moving parts
- Use it with your own 1/2", 5/8" or 3/4" 25 ft. or 35 ft. docking line
- Easily detach and collapse the head for storage
- NEW Landing Loop Docking Pole (LL-1)
- Instructions showing how to use the Landing Loop
- Instructional Video available from the website
"The Landing Loop™ will revolutionize your boat docking. Never Jump Off Your Boat Again While Docking. Just Reach for Your Landing Loop™
Benefits of using the Landing Loop™:
- Reduces the risk of injury or damage to the boat while docking
- Enhances boating safety while docking
- Use it whenever there is no one on the dock to assist you in docking
- If the Captain gets within 6-8 feet of the dock, he or she can easily tie up using the Landing Loop™
- Tie-up to a cleat, piling, barge, bollard, or another boat
- Note: You have to provide the docking line for the Landing Loop™
- Useful when:
- Single-handed docking
- Traveling the ICW
- Tying up at a Public Dock, Gas Dock, or Pump Out Dock
Click here to see detailed instructions on how to set up your docking line for use with your Landing Loop™
Check out the Pontoon Deck Boat (PDB) review of the Landing Loop Docking Pole.
LIMITS OF LIABILITY: Neither Seller nor any of its agents or employees shall be held liable for any improper or incorrect use of its product or product information and assumes no responsibility for anyone's improper use of the Landing Loop™. This disclaimer of liability applies to any damages or injury under any cause of action.
The Landing Loop Float Kit is an accessory for your Landing Loop Docking Pole. It will provide flotation for your docking pole in case it gets dropped in the water.
- Landing Loop Float Kit + Instruction sheet - 3 pieces (FK-1)
"The Landing Loop™ will revolutionize your boat docking. Never Jump Off Your Boat Again While Docking. Just Reach for Your Landing Loop™
Benefits of using the Landing Loop™:
- Reduces the risk of injury or damage to the boat while docking
- Enhances boating safety while docking
- Use it whenever there is no one on the dock to assist you in docking
- If the Captain gets within 6-8 feet of the dock, he or she can easily tie up using the Landing Loop™
- Tie-up to a cleat, piling, barge, bollard, or another boat
- Note: You have to provide the docking line for the Landing Loop™
- Useful when:
- Single-handed docking
- Traveling the ICW
- Tying up at a Public Dock, Gas Dock, or Pump Out Dock
Click here to see detailed instructions on how to set up your docking line for use with your Landing Loop™
Check out the Pontoon Deck Boat (PDB) review of the Landing Loop Docking Pole.
LIMITS OF LIABILITY: Neither Seller nor any of its agents or employees shall be held liable for any improper or incorrect use of its product or product information and assumes no responsibility for anyone's improper use of the Landing Loop™. This disclaimer of liability applies to any damages or injury under any cause of action.
Any person associated with boating knows that docking a boat is one of the most challenging experiences. There are many articles written in the boating magazines about this very subject. Everyone has at least one very unpleasant story to tell about someone they know, jumping off a boat to tie up or getting hurt during a docking experience. We decided to make the docking experience less confusing.
- Specs of the NEW Landing Loop design:
- Collapsed length of pole ONLY = 39 1/2 inches - extends to approx. 10 feet
- Collapsed length of the pole and "Y" frame = 54 3/4 inches
- "Y" frame width = 20 inches
- Lighter weight New: 1 lb. 13 oz., Original: 2 lb. 9 oz - 3/4 lb. lighter
- Has an aluminum “Y” frame (the previous "Y" frame was steel)
- Quickly disassemble the frame for easy, compact storage.
The Landing Loop™ is a product created by boaters for boaters. It was in development for over three years. Use it has on large boats, smaller boats, motorboats and, sailboats. It is lightweight, safe, and easy to use. It has been used worldwide, including in Florida, on the Great Lakes, Lake Champlain, and the Illinois River. It has been used to dock in calm weather as well as in 30 miles an hour winds.
We have created an instructional video and have included it on our Web Site. We ask that you watch the video and practice using the Landing Loop before using it for docking. It will prepare you and your crew so everyone will be more familiar with their function during a docking situation.
IT IS THE RESPONSIBILITY OF THE BOAT’S CAPTAIN TO MAKE ALL CRITICAL DECISIONS DURING ALL DOCKING SITUATIONS.
Use the Landing Loop™ when there is no one on the dock to assist you in docking. Using the Landing Loop may prevent your mates from getting hurt and make every docking situation a safe and more enjoyable experience.
- Use the NEW Landing Loop™ on any size or type of boat
- The NEW Landing Loop™ will accommodate up to an 18" wide cleat
- The NEW Landing Loop™ is lightweight, simple to use and has no moving parts
- Use it with your own 1/2", 5/8" or 3/4" 25 ft. or 35 ft. docking line
- Easily detach and collapse the head for storage
- Two (2) NEW Landing Loop Docking Pole (LL-1)
- Instructions showing how to use the Landing Loop
- Instructional Video available from the website
"The Landing Loop™ will revolutionize your boat docking. Never Jump Off Your Boat Again While Docking. Just Reach for Your Landing Loop™
Benefits of using the Landing Loop™:
- Reduces the risk of injury or damage to the boat while docking
- Enhances boating safety while docking
- Use it whenever there is no one on the dock to assist you in docking
- If the Captain gets within 6-8 feet of the dock, he or she can easily tie up using the Landing Loop™
- Tie-up to a cleat, piling, barge, bollard, or another boat
- Note: You have to provide the docking line for the Landing Loop™
- Useful when:
- Single-handed docking
- Traveling the ICW
- Tying up at a Public Dock, Gas Dock, or Pump Out Dock
Click here to see detailed instructions on how to set up your docking line for use with your Landing Loop™
Check out the Pontoon Deck Boat (PDB) review of the Landing Loop Docking Pole.
LIMITS OF LIABILITY: Neither Seller nor any of its agents or employees shall be held liable for any improper or incorrect use of its product or product information and assumes no responsibility for anyone's improper use of the Landing Loop™. This disclaimer of liability applies to any damages or injury under any cause of action.
The Landing Loop Arm Replacement Kit is a set of both the left and right arms for your Landing Loop Docking Pole.
- Landing Loop Arm Replacement Kit (includes both the left and right arm)
"The Landing Loop™ will revolutionize your boat docking. Never Jump Off Your Boat Again While Docking. Just Reach for Your Landing Loop™
Benefits of using the Landing Loop™:
- Reduces the risk of injury or damage to the boat while docking
- Enhances boating safety while docking
- Use it whenever there is no one on the dock to assist you in docking
- If the Captain gets within 6-8 feet of the dock, he or she can easily tie up using the Landing Loop™
- Tie-up to a cleat, piling, barge, bollard, or another boat
- Note: You have to provide the docking line for the Landing Loop™
- Useful when:
- Single-handed docking
- Traveling the ICW
- Tying up at a Public Dock, Gas Dock, or Pump Out Dock
Click here to see detailed instructions on how to set up your docking line for use with your Landing Loop™
Check out the Pontoon Deck Boat (PDB) review of the Landing Loop Docking Pole.
LIMITS OF LIABILITY: Neither Seller nor any of its agents or employees shall be held liable for any improper or incorrect use of its product or product information and assumes no responsibility for anyone's improper use of the Landing Loop™. This disclaimer of liability applies to any damages or injury under any cause of action.
The Landing Loop "Y" Replacement Kit is the piece that both the left and right arms and the extendable pole attach to creating your Landing Loop Docking Pole.
- Landing Loop "Y" Replacement
